User manual

Charging your battery:

1. Move the protective cover over the USB charging port aside.

2. Insert the USB connector of the charger into the phone.

3. When charging is compleletd, remove the USB charger from

the phone and replace the protective cover over the USB port.

Powering the Phone ON and OFF

Before the phone is powered on, ensure that the phone has been charged

and that the (U)SIM card is inserted in the phone. When the phone is

powered on without (U)SIM card inserted, a message will be displayed

advising that the (U)SIM card must be inserted to continue. Without the

(U)SIM card inserted the phone will only support emergency calls.

The phone can be powered on while it is being charged. If the phone

powers off automatically due to low power, the power-on info will not

display until it has been charged for 30 minutes.

Turning the Phone ON

1. Press and hold the END/POWER key.

2. If the phone has been locked, insert the lock code and select

the MENU KEY to confirm.

3. The homescreen will display the default wallpaper and

screensaver. These images can be changed to one of your

choice. For more information see the section titled SETTING

UP YOUR PHONE.