Owner's Manual

THE SELF PROTECTION OF YOUR INVERTER
Type
Possible cause
If the output
Current I power exceeds
overload the rated output
power 10 to 15%.
Input low
I Input voltage I
voltage
lower than 10.5V.
Input high I Input voltage
voltage higher than 15V.
Over I The PCB
temperature temperature is
around 230 °F.
How do you know
if the protection is
activated?
The inverter
will automatically
shut off , RED
indicator lights up .
Solution
Remove all appliances
and unplug It.
Use smaller
power comsumption
appllances.
Remove all appliances
and unplug It.
Recharge the battery.
Remove all appliances
and unplug it.
Check the battery
voltage, make sure
it is within 11-1 SV .
Remove all appliances
and unplug it.
Cool down for
15 minutes before
turning on again.
L:_
Remarks
Although the inverter has
protection against over load,
it may still damage the
inverter If the Input
voltage exceeds 16V.
Please ensure there is
ventilation in the
surrounding environment.