User's Manual

MobileHelp Complete User Guide 11
Step 3. Turning on your Base Station

Turn on your Base Station using the on/off switch located on the back.

The display screen will turn on.

If the Base is setup correctly, the Base Station will say “system ready.”

The emergency and reset buttons will illuminate.

Make sure your Base Station is connected to the cellular network by checking for the
signal strength bars on the Display screen.

You can use the volume control buttons on the front of the unit at the bottom of the display
screen, indicated by the “–” or the “+” sign, to adjust if the voice is too loud or too soft.

Within a few minutes of turning on the system, the Cellular Base Station will obtain the
date and time from the cellular network and will appear in the display area. You are not
able to set the date and time manually.
Figure 6Figure 5
ON/OFF
Switch