User's Manual

MobileHelp Cellular Classic System User Guide
9
Step 5. Live Operator Test: Testing Your Help Buttons

Press the wrist or neck button firmly once.

The button’s red light turns on indicating a signal was sent to
the Base Station.

Your Base Station will say “call in progress” several times.

When the call goes through it will say “Please stand by for
operator.”

Then an emergency operator will communicate with you
through the Base Station.

Please state clearly to the operator that “THIS IS A
TEST.” If you do not explain to the operator that you are
testing your unit, emergency help will be dispatched.

Remember you can also test your help buttons, using the auto test button on your
Base Station.
Note: It is important that you test your system at least once a month. The
test
button light on your Base Station will flash green repeatedly within one (1) month
of the last button press letting you know when it is time for you to test your system.
Figure 6