User's Manual

MobileHelp Customer Support 1-877-827-6207
6
Step 2. Plug in the Power Cord
Plug the power cord that is attached to the back of the Base Station into an electrical
outlet that is not controlled by a light switch.
Step 3. Turning on your Base Station (Please refer to Figures 3 and 4.)
Turn on your Base Station using the on/off switch located on the back.

If the Base is set up correctly, the Base Station will say “system ready.”
To avoid accidentally turning off the Base Station, DO
NOT plug it into an electrical outlet that is controlled by
a light switch.
WARNING
To prevent electrical shock please keep the system away from wet
locations.
AVERTISSEMENT
Pour éviter le choc électrique, SVP tenir le système éloigné des endroits
humides.
DANGER
Electric
shock risk

Figure 3