User`s guide

xTablet T7000 Rugged Tablet PC User's Guide
36
Calibration
The touch screen is a thin membrane on the top of the display that responds to mechanical pressure on
the screen’s surface. The cursor on the screen is controlled by the stylus or your fingertip. If you notice
the tip touch-point not matching up with the cursor, you can calibrate the touch screen. Be sure to read
the directions in the Tablet PC Settings screen for detailed instructions and additional options.
To calibrate the touch screen
1.
Select Start > Control Panel > Tablet PC Settings, then tap Calibrate to activate the calibration
screen.
2.
Hold the pen and position your stylus as you normally do when working with the xTablet T7000.
3.
Use the pen tip to click on the center of the crosshairs. The wheel moves to another location on-
screen.
4.
Tap Yes to accept the calibration.
5.
Tap OK to closed the Tablet PC Settings.