User`s guide
xTablet T7000 Rugged Tablet PC User's Guide
28
Hardware and Software
Global Positioning System (Optional)
The GPS Software Setup application is installed on the xTablet T7000 desktop as a shortcut for you
and will activate the 50-channel u-Blox 5 engine that is built into the xTablet T7000.
To activate the u-center
1.
Double-tap the GPS Software Setup shortcut icon on the xTablet T7000 desktop.
2.
Select a language from the Installer Language drop-down list, then tap OK (default is English).
3.
Follow the instructions in the wizard to install the device driver, tap Finish, then tap Finish to activate
the u-center.
Use the u-center User's Guide for information on how to operate the GPS. You will need Adobe Reader
to view this guide.
To access the u-center User's Guide
Select Start > All Programs > u-blox > u-center > Documentation, then double-tap User's
Guides, then double-tap the u-center User's Guide.pdf file to open.
Imager/Bar Code Scanner (Optional)
The ScanWizard application is installed on the xTablet T7000 desktop as a shortcut for you. It
activates the bar code scanner that is built into your xTablet T7000, such as the Intermec EA15 2-D
Imager Engine. Contact the MobileDemand technical support at 319-363-4121 for assistance.
To configure the bar code scanner
1.
Double-tap the ScanWizard shortcut icon on the xTablet T7000 desktop to access the
MobileDemand Scanner Wizard, then tap Continue.
2.
In the Wedge Setup screen, do the following:
a.
Select the applicable Driver Registry Location/Startup Mode option.
b.
In the Please pick your scanner type group, select your scanner type, then click Autodetect
Scan Engine for the wizard to determine your scanner type for you.
c.
Complete the applicable information in the rest of this screen.
d.
Click Next to continue.
3.
In the Final Setup screen, check any of the options that apply, then click FINISH to start using your
bar code scanner.