User`s guide

25
xTablet T7000 Rugged Tablet PC User's Guide
Hardware and Software
Measure the Distance from Cover to T7000
The express card cover must be properly fit to the xTablet T7000 to protect your express radio card and
keep it fully engaged. To achieve that, a combination of compressible foam attached to the inside of the
express card cover and a rubber spacer set is used.
You must measure the distance from the top of the lip on the express card cover to the xTablet T7000
when it is resting on, but not secured to, the T7000.
The ideal distance is between 3/8" and 1/2."
A rubber spacer set is provided to assist you in achieving this ideal distance.
To measure the distance
1.
Stand the xTablet T7000 upright on your work surface.
2.
Press the express radio card into the express card slot on the top of the xTablet T7000 until it
latches in place.
3.
Lay the 5-layer rubber spacer set on top of the express radio card.
4.
Position the express card cover on top of the rubber spacer set.
5.
With the express card fully latched, measure the distance from the lip of the express card cover to
the xTablet T7000.
Do not press down or push on the express card cover while you are measuring.
Front view of xTablet T7000 with the distance marked from the lip of the express card cover to the T7000.