User`s guide

xTablet T7000 Rugged Tablet PC User's Guide
24
Hardware and Software
Remove the Rubber Card Cover
Note: Most xTablet T7000 units are shipped with a
rubber card slot cover that you will have to remove
before completing the assembly instructions for the
express card cover.
If you had ordered an xTablet T7000 with a hatch
cover, these parts may already be removed.
To remove the card slot cover
1.
With the xTablet T7000 face down, use a Phillips screwdriver to unscrew and remove the card slot
cover caps on either side of the cover.
2.
Detach the rubber cover hinges from the xTablet T7000.
3.
Remove the second pair of screws (and possibly o-rings) from the deeply-recessed holes next to
where the hinges were attached.
4.
Store the rubber card cover and screws for future use.
Top and back view of xTablet T7000 with card slot assembly