User`s guide

xTablet T7000 Rugged Tablet PC User's Guide
22
Hardware and Software
Camera
The Camera Utility application is installed on the xTablet T7000 desktop for you. It accompanies the
2-Megapixal integrated camera that is built in the back of the xTablet T7000. See "Back View" for an
illustration.
When you are ready to use the camera, you must take the xTablet T7000 out of its dock before you
can use the camera. Then you need to activate the utility before you can capture and retain the pictures
or videos you want to take. The utility will open to its default size - you can drag the utility to the top of
the xTablet T7000 desktop to maximize the screen.
To access the utility
Select Start > Camera Utility to access the VideoView dialog box.
By default, the VideoView is set to record videos without sound. You can enable a high-definition
microphone to include sound with your video.
To enable the microphone
Select Devices > Microphone to record sound with your video.
Use the Options menu to adjust the properties of your audio or video filters and the Capture menu to
start and stop your video and audio captures, add closed captioning, adjust the master stream, set the
frame rate, or set the time rate.
Use the File menu to set the capture file, allocate file space, and save the captured video.
You can also use the Capture menu to take a picture rather than a video.
To take a picture
1.
Select Capture > Snap Shot to open the ShowImage dialog box with the captured picture.
2.
In the ShowImage dialog box, select File > Save to save the image.