Users Manual Part 2

Vehicle Monitoring and Locating System Mobile Video Computing Solutions LLC
Tow Truck Installation Procedures
19 September 21, 2021
Sample Camera Views
Forward View
Cab View
Installation Steps
1) Choose a stable mounting location high up and centered on the windshield. Interior front
facing cameras should be mounted as high as possible. Ensure that camera has
unobstructed view which isn’t blocked by rearview mirrors or sun visors in the down
position.
2) Remove adhesive cover and place adhesive pad on camera bracket firmly.
3) Clean area of windshield and back of camera bracket with isopropyl pad and allow to dry.
4) Depending on the orientation of the camera and its mounting position the mounting
bracket may need to be rotated 180 degrees. Use a #2 Phillips screwdriver to loosen the
two bracket screws. Rotate 180 degrees and tighten screws slightly. Do not tighten
screws until camera has been aimed properly.
5) Remove adhesive cover and carefully place camera bracket on windshield while ensuring
cable exits upwards and camera is level horizontally to the top of the windshield.
6) Route camera cable up toward headliner and place connector just behind headliner for
ease of access for later camera servicing or replacement.