User's Guide

1
1
2
23
2
1a 1b
SECURE PLUG™ (PATENT PENDING) USER GUIDE
8
MTI P/N 063-00243 rev B ©2018 MTI All Rights Reservedwww.mobiletechinc.com | T:800.426.6844
DELETING WHITELIST (This will delete all User Keys from the system.)
ADDING NEW USER KEYS
REMERCHANDISING
From an Armed state, place the User Key over the RFID
icon to disarm the system. LED will be flashing white.
From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
Place Authorization Card over the RFID icon. Follow Key
Whitelist process starting on page 4.
Merchandise a new product by
following the process on page 5.
If you did not unplug a product,
there is no need to remerchandise
the product again.
From an Alarming state, place the
User Key over the RFID icon to
silence the alarm. Then hold down
the User Key for 5 seconds to
return back to the disarmed state.
LED will be flashing white.
From an Armed state, place the
User Key over the RFID icon to
disarm the system. LED will be
flashing white.
Hold down the Authorization Card
for 5 seconds, LED will be solid
yellow.
Place the Authorization Card over
the RFID icon AGAIN while LED is
yellow.
If successful Æ unit beeps 2 times
and the LED will turn solid green
If unsuccessful Æ unit beeps 4
times (retry)