Product Manual
MTI CONNECT
®
PoE NETWORK EXTENDER PRODUCT MANUAL
2
MTI P/N 063-00312 rev A ©2020 MTI All Rights Reservedwww.MTIGS.com | T:800.426.6844
1
NETWORK PAIRING
3
Place the MTI Connect
®
Hub in pairing mode by
inserting an MTI Connect
®
Unied IntelliKey into the
USB Mini connector on the top of the MTI Connect
®
Hub. After 10 seconds the System Status LED will
begin ashing blue, indicating the Hub is in Pairing
mode.
Press the recessed Pairing Button (labeled) shown
below for two seconds. The Network Extender Status
LED will begin ashing blue, indicating it has entered
pairing mode.
System
Status LED
Pairing
Button
The MTI Connect
®
Hub will automatically
exit pairing mode after 15 minutes and it’s
status LED will return to the previous state.
When the Network Extender attaches to the mesh network, the blue ashing LED will become solid Green. If the Network
Extender does not connect to a mesh network within 90 seconds, it will exit pairing mode and will return to its previous
state.
Connected
2