User`s guide

button in the Devices tab to start the Bluetooth Setup Assistant. Press the Continue button to
skip the Introduction dialog.
4. The Select Device Type dialog will be displayed. Choose the Mobile phone option and press
the Continue button.
5. The Searching for your mobile phone dialog will be displayed. Wait until your device appears
in the Mobile Phones list (under the same name as your HotSync identifier) and press the
Continue button.
6. The Gathering information about your device dialog will be displayed. Wait until the
Continue button becomes available and press it.
7. The Pairing with the mobile phone dialog will be displayed with the passkey code. Enter this
code on the device to pair it with Mac.
8. Enable the Access the Internet with your phone's data connection option and press the
Continue button.
9. Fill the Username, Password and GPRS CID String (this is a dial number, use #777 for
CDMA networks and *99# for GSM networks) with the correct values. Also select either the
Mobile Stream CDMA option (for CDMA 1xRTT or EvDO networks) or the
Mobile Stream GSM option (for GSM GPRS or EDGE networks) in the Modem Script pull-
down list and press the Continue button.
10. Press the Quit button to close the Bluetooth Setup Assistant and return to the Bluetooth
control panel.
11. Go into Mac OS X System Preferences -> Network, select the Bluetooth item and press the
Configure button.
12. The properties dialog for the Bluetooth connection will be displayed. Press the PPP Options...
button, disable the Send PPP Echo packets and Use TCP header compression options then
press the OK button. Note that with Verizon you may actually need to enable the
Send PPP Echo packets option to prevent disconnecting after a short period of inactivity.
13. Press the Apply Now button and close the Network control panel.
3.5. Upgrading
To uprade USB Modem first remove the older version then install the new one as described above.
Also copy new versions of the Mobile Stream CDMA and Mobile Stream GSM files to the
/Library/Modem Scripts folder on your Mac.
3.6. Uninstallation
Go into Start -> Settings -> System -> Remove Programs on the smartphone/communicator, select
the Mobile Stream USB Modem entry and tap the Remove button.
Page 10 of 12