Specifications

V2.0 
6. In the Account name section, enter your full e-mail address
Enter your e-mail password
Leave “Log on using Secure Password Authentication” unticked
Click Next
. Click Finish, then Close. You have now completed setting up your mailbox and are ready to start sending and receiving e-mail!

. Click Tools, then E-mail Accounts
2. Select Add new e-mail account and click Next
. Select POP and click Next
4. Under User Information, type in your name, and your e-mail address
5. Under Server Information:
Type in the incoming mail server:

Type in the outgoing mail server:

6. Under Logon Information:
Type in User Name as your full e-mail address
Type in your e-mail password
Leave “Log on using Secure Password Authentication” unticked
. Click Finish. You have now completed setting up your mailbox and are ready to start sending and receiving e-mail!

If this is your rst time using Apple Mail:
. Open Apple Mail from your dock
2. Enter the details as below from after step 
If you already have Apple Mail setup with a different e-mail provider:
. Open ‘apple mail’ from your dock
2. Go Mail, Preferences, click the account tab
. Click the plus symbol at the bottom left
Account Type: POP
Account Description: Virgin mail
Full Name: Your full name
E-mail Address: Your full e-mail address
Click Continue
4. Incoming mail server:

User Name: Type in your full e-mail address
Password: Your e-mail password
Click Continue
5. Leave ‘use secure sockets layer’ unticked
Leave Authentication as: Password
Click Continue
6. Outgoing Mail Server:

Leave Authentication unticked
Leave ‘use secure sockets layer’ unticked
Click Continue
. Check that settings are correct on the summary page. You have now completed setting up your mailbox and are ready to start sending and
receiving e-mail!

. From the Tools menu, select Accounts
2. Click the Add button
. Select E-mail Account and click Next
4. Enter a Display Name and click Next
5. Enter your Virgin Broadband E-mail address and click Next
6. Ensure that POP is selected in the Incoming e-mail server type eld and enter the following server details:
Incoming mail (POP or IMAP) server:

Outgoing e-mail server (SMTP ) name:

Click Next
. Enter your full email address in the E-mail username eld. Enter your password and click Next
8. Click Finish, then Close to save the settings and access your email