User`s guide

To disconnect, stop the pppd process like below:
bash-2.05# kill <pppd_process_pid>
4.5. Connecting via Bluetooth
Generally a setup consists of two major steps:
1. Configure the RFCOMM channel to Treo and get a device node for it. The exact meaning of
this depends on the Linux Bluetooth stack and distribution.
2. Configure the PPP connection as described above and start just like with the USB case but use
the device node from the first step instead of the /dev/ttyACM0
4.6. Upgrading
To upgrade USB Modem to a new version install the new USBModem.prc file on the Treo and update
the pppd scripts from the new templates.
Page 11 of 12