Use and Care Manual

OPERATION MODES

This rechargeable work light features 3 different light modes. You can

select the suitable light operation mode for each application.

LOW – MED – HIGH MODE:

• Press the Power Switch once while the unit is opened; this will turn ON

the battery status indicator and both sides of the unit at 30% intensity

with a maximum operating time of at least 10 hours on a full charge.

• Press the Power Switch twice while the unit is opened; this will turn ON

the battery status indicator and both sides of the unit at 100% intensity

with a maximum operating time of at least 3.5 hours on a full charge.

• Press the Power Switch three times while the unit is opened; this will

turn ON the battery status indicator and one sides of the unit at 50%

intensity (power saving mode) with a maximum operating time of at least

7 hours on a full charge.

• Press the Power Switch four times to turn the unit and Battery status

indicator OFF

NOTE: THE CORDLESS RECHARGEABLE WORK LIGHT CAN ALSO BE

USED WITH A TRIPOD (SOLD SEPARATELY) TO USE WITHOUT THE

TRIPOD, SIMPLY OPEN THE UNIT AND PLACE IT ON A FLAT SURFACE

(AS SHOWN BELOW).