LIGHTBOLT MAX EXTENDABLE WORK LIGHT Model No. 4063 INSTRUCTION MANUAL MobilePower, LLC. Miami, FL www.mobilepower-us.com Customer Support: (800) 708-8550 customerservice@mobilepower-us.
BEFORE YOU USE THIS DEVICE FOR THE FIRST TIME, PLEASE READ THE FOLLOWING NOTES IN THIS MANUAL AND HEED ALL WARNINGS AND CAUTIONS, EVEN IF YOU ARE FAMILIAR WITH HANDLING ELECTRONIC DEVICES. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. WARNING To prevent serious injury or damage: • Keep dry. DO NOT open, drop, short-circuit, incinerate, expose temperatures higher than 140°F, or change /use if damaged. • Only use the Charging Adaptors provided with the Work Light.
MAGNETIC BASE The Extendable Work Light features a magnetic base with a soft coating on the bottom, allowing the light to be attached to a vehicle or other metal objects without damaging or scratching the painted surface. NOTE: Do not place the light on or near computer equipment, computer disks or other types of magnetic storage equipment as strong magnetic fields can erase or corrupt data. OPERATION MODES This extendable work light features 5 different light modes.
Press the power switch twice while the unit is extended to position (I) • Top & Side Red Flashing LED’s: Press the power switch three times while the unit is extended to position (I) • Work Light + 1W Spot Light + Top & Side Red flashing LEDs: Press the power switch four times while the unit is extended to position (I) Note: to turn the unit OFF, press the power switch five times. USB CHARGING PORT The Lightbolt Max has a built-in USB charging port output to recharge small portable USB devices. 1.
CHARGING INSTRUCTIONS THE EXTENDABLE WORK LIGHT MUST BE FULLY CHARGED BEFORE BEING USED FOR THE FIRST TIME. IT IS RECOMMENDED THAT THE BATTERY BE RE-CHARGED EVERY 3 MONTHS TO ENSURE MAXIMUM PERFORMANCE IN AN EMERGENCY. This will ensure that the battery gives its best performance now and on future re-charging cycles. The AC and DC charging adapters are for recharging the battery only. They cannot be used to directly power the light. Always ensure that the light switch is in the OFF position while charging.
USING THE AC CHARGING ADAPTER: 1. Stand the light vertically on its base. Plug the AC charger into the charging port on the base of the unit next to the charging LED indicator. 2. Plug the adapter into a 120V outlet and switch ON the outlet (if applicable). 3. The charging indicator LED will glow RED while charging is in progress. 4. The battery will be fully charged after approximately 4-6 hours, and the RED charging indicator will turn GREEN when the unit is fully charged.
CARE AND MAINTENANCE STORAGE Store the Extendable Work Light and charging adapters in a clean and dry area. Be sure to keep the charging adapters supplied with this product stored separately from similar items as only charging adapters included with this light are compatible. Using a non-compatible charger could cause damage to the light or personal injury. The work light may also be stored in a vehicle for use in roadside emergencies.
MobilePower, LLC. Warrants to the original purchaser that this portable lighting unit shall be free from defects in material and workmanship for a period of one year from the original date of purchase. If the product is determined by MobilePower, LLC to be defective in material and workmanship during the warranty period MobilePower, LLC will repair or replace the defective product or defective accessories/components with factory original specification product at its option.
