Instruction manual

ACU-1000 Operations Manual
2-64 Interoperability Now
2.15.1.6 Module Names Screen
The CPM-4 has the ability to store and retrieve user-defined names for each of the modules
installed in the chassis. The module names may be programmed by browsing to the “Module
Names” link at the top of the web pages, and then typing in the name alongside the associated
module extension number. Note: These module names are only needed when using the ACU-
1000 in a WAIS (Wide Area Interoperability System.) See the WAIS Controller manual for
details. These names will show up on the WAIS Controller screen.
Note: Module 0 corresponds with the HSP module of a single Chassis ACU-1000 or Master
ACU-1000 of a dual chassis system. Numbers 1 through 12 are associated with the unit’s
interface module extension numbers. For dual chassis systems, Module 25 is the Expansion
Chassis HSP module, while numbers 13 through 24 correspond with this chassis’ interface
extensions (see Figure 2-25).
Figure 2-25 CPM-4 Module Names Screen