Instruction manual

ACU-1000 Operations Manual
Interoperability Now 2-35
(QC2 No) Set Known Delay
• Set the TX Audio Delay to the setting equal to (or just above) the known channel
acquisition time.
• Click on “Apply” to save the TX Audio Delay setting.
Jump to QA5. Flow Chart C Complete.
(QC2 Yes) Contact Systems and Applications Engineering at the Raytheon factory for
recommendations.
QC3 Did Factory Solution Work?
(QC3 Yes) Implement Factory Solution Recommendation
• Set TX Audio Delay
Jump to QA5. Flow Chart C is Complete.
(QC3 No) Jump to QC4
QC4 Can Operational Procedures be Implemented?
(QC4 Yes) Implement Operational Procedures
When long channel acquisition times cannot be completely compensated for by adding TX
Audio Delay, system users must follow proper procedures to ensure that the entire message is
being heard. This can mean simply waiting for the necessary time after keying their
microphones before beginning to speak, repeating important communications, or getting a
response from the listener. Alternatively, there may be adjustments or modifications that can
be made to the trunked radio system to decrease the channel acquisition times. Contact the
system supplier to inquire about reducing acquisition times.
(QC4 No)
Contact Systems and Applications Engineering at the Raytheon factory for further
recommendations.
Flow Chart C Complete - Jump to QA5