Instruction manual

ACU-1000 Operations Manual
1-20 Interoperability Now
Table 1-1 ACU-1000 Specifications
See Section 5 for individual module specifications
General/Environmental
RS-232 Serial Port P-15
DB-9 Female DCE connector. Baud Rates: 1200, 2400, 4800, and 9600.
PSM-1A Power Supply Front Panel
POWER On/Off Switch; AC On, DC On, +12VDC, -12VDC LEDs.
HSP-2A Front Panel
Speaker, Speaker On/Off Switch, Volume Control, Signal, PTT, and
FAULT LEDs.
CPM-4 Front Panel
RJ-45 Ethernet Connector; Master, Expansion, and Fault LEDs.
DSP-2 Front Panel
RJ-45 Ethernet Connector; Link Active, COR, Signal, PTT, and Fault
LEDs.
PSTN-2 Front Panel
RJ-11 Telephone Line Connector (L1), Monitor, Ring, Connect, VOX
and Fault LEDs.
LP-2 Front Panel
RJ-11 Telephone Set Connector (P1), Monitor, Ring, Off Hook, VOX
and Fault LEDs
Rear Panel
DC Fuse holder, DC Input Terminal Strip, AC Filter Module, DB-15
Connectors to Interface 13 Modules, DB-9 Serial Remote Connector,
and DB-37 Expansion Connector.
AC Input Power
115 or 230 VAC +/- 15%, 47-63 Hz, 100 VA typical, 130 VA max.
DC Input Power
+11 to +15 VDC @ 5A, nom.
Size
5.25” H x 19” W x 11” D (13.3 x 48.3 x 28 cm).
Operating Temperature
-20 to +60 degrees C.
Storage Temperature
-40 to +85 degrees C.
Humidity
Up to 95% @ 55 degrees C.
Shock
MIL-STD-810D, Method 516.3, Procedure VI.
Vibration
MIL-STD-810D, Method 514.3, Category I.