Instruction manual

ACU-1000 Operations Manual
Interoperability Now 1-15
1.7.2 The WAIS Controller
The WAIS Controller software provides an icon-based GUI interface to facilitate the control
and monitoring of Wide Area Interoperability Systems. The WAIS Controller has a variety of
views that allow its operators to create and dissolve cross-connections that take place within an
individual Local Interoperability System as well between local systems over a network.
Multiple operators can simultaneously control or monitor a system. Each operator has a set of
permissions that may limit the types of operations that the operator is allowed to perform, or
the system components that the operator is allowed to control.
Figure 1-7 below shows the Overview for a wide area system that has eight different WAIS
nodes (identified in the Site List at the left). The system depicted has many current cross-
connections, identified by Network Group Letters, Local Group Numbers, and Module Icons.
See the WAIS Controller Manual for further information.
Figure 1-7 WAIS Controller Overview Screen