Instruction manual

ACU-1000 Operations Manual
8-3
LE-10, 1-18
LE-20, 1-18
Legacy Module, 7-13
LIS, 1-2
List of Figures, 6
List of Tables, 8
Local Operator to Radio
Operation, 3-18
Local Phone to Radio
Operation, 3-20
LP-2, 1-4
4.10.1 General Description, 5-11
Jumper Settings, 2-45
LP-2 Module
Technical Information, 5-11
LP-2 Module Connections, 2-16
LP-2 Programming Item, 2-88
LP-2 Programming Items, 2-106
Audio Delay, 2-107
Aux Output Control, 2-109
Dial and Busy Tone Style, 2-107
Dial Tone Enable, 2-108
DTMF Command Enable, 2-108
DTMF Mute Timer, 2-106
Module Security Level Selection, 2-107
Ring Cadence, 2-108
Ringback Enable, 2-108
Ringing Time, 2-108
Voice Prompt Initiation Delay, 2-109
VOX Hang Time, 2-107
VOX Threshold, 2-107
LP-2 Specifications, 5-11
Make a Connection
HSP-2, 3-8
Interface Module Operational Commands, 3-12
Make A Connection
HSP-2 Operational Command Items, 3-8
Interface Module Operational Commands, 3-11
Master/Slave LEDs (CPM-2), 3-6
Missed First Syllables, 4-1
Missed Syllables in Mid-Conversation, 4-1
Missed Syllables Mid-Conversation, 4-5
Module Connections- P13, 2-14, 7-15
Modules
CPM-2, 1-4
DSP-1, 1-4
HSP-2, 1-3
LP-2, 1-4
PSM-1A, 1-3
PSTN-2, 1-4
Mon (Monitor) LED (RDI-1, DSP-1, PSTN-2, LP-
2), 3-6
Monitor Function
HSP-2, 3-9
HSP-2 Operational Command Items, 3-8
Interface Module Operational Commands, 3-11,
3-12
Mounting, 2-3
noise reduction, 4-11
Noisy Received Signals, 4-11
NXU-2
A, 1-17
Off Hook LED (LP-2), 3-7
Operation, 3-1
Optimization, 2-18, 2-24
Optional Equipment - Not Supplied, 1-22
Options, 6-1
Phone Patch, 1-7
Pictorial Layout for Operating Scenarios, 3-17
PIN Security, 3-14, 3-16
PIN Security-How to Use, 3-16
Ping Pong, 4-6
Ping-Pong, 4-1
Poor Audio Quality, 4-1, 4-9
Power Supply Module
Technical Information, 5-1
Power Switch (PSM-1), 3-5
Priority Operation Mode, 3-14
Programming Configuration Settings, 2-49, 2-82
PSM-1A, 1-3
PSM-1A replaces PSM-1, 7-14
PSTN to Radio
Operation, 3-18
PSTN-2, 1-4
General Description, 5-9
PSTN-2 Module
Technical Information, 5-9
PSTN-2 Module Connections, 2-15
PSTN-2 Programming Item, 2-88
PSTN-2 Programming Items, 2-101
2-Wire/4-Wire Operation, 2-103
Audio Delay, 2-102
Dial Mode, 2-101
DTMF Command Enable, 2-104
DTMF Mute Timer, 2-102
Inactivity Disconnect Timer, 2-104
Module Security Level Selection, 2-103
PSTN Type, 2-101
Ringing Time, 2-104
Telephone Line Level, 2-101
Telephone Receive Level Boost, 2-101
Voice Prompt Initiation Delay, 2-104
VOX Hang Time, 2-103
VOX Threshold, 2-103
PSTN-2 Specifications, 5-10
PTT, 1-6
PTT LED (RDI-1, DSP-1), VOX LED (PSTN-2,
LP-2), 3-6
Radio to Local Operator
Operation, 3-19
Radio to PSTN
Operation, 3-19