Instruction manual

ACU-1000 Operations Manual
Interoperability Now 3-19
3) Local operator and User A talk. At the end of conversation, either user can
terminate the link by entering * #. In links involving more than two modules, all
users should terminate the link by using * #.
3.6.3.4 Radio to Local Operator
3.6.3.4.1 Conditions:
1) Hand-held radio User A wants to talk to local operator at the ACU-1000.
3.6.3.4.2 Operation Steps:
1) The Local Operator Extension number is '00', so hand-held radio User A enters * 0
0 on his DTMF keypad.
2) The ACU-1000 enables the connection between the radio the local operator and
issues the “00 CONNECTED” voice prompt to User A indicating the connection
has been successfully completed.
3) User A can be heard at the HSP-2A speaker and handset. User A and local operator
talk. At the end of conversation, either user can terminate the link by entering * #.
In links involving more than two modules, all users should terminate the link by
using * # to make sure all parties are removed from the net..
3.6.3.5 Radio to PSTN
3.6.3.5.1 Conditions:
1) Hand-held radio User A wants to be connected to PSTN and make a call to 555-
1234.
2) PSTN module is not busy, and phone at 555-1234 is not busy.
3.6.3.5.2 Operation Steps:
1) PSTN-2 Module Extension number is '06', so User A enters * 0 6 on keypad.
2) The ACU-1000 prompts the user A to “ENTER PHONE NUMBER”.
Note: All phone number entries must be terminated by the # key, so the
ACU-1000 can determine the end of the number.
3) User enters 5 5 5 1 2 1 2 #, and the ACU-1000 PSTN-2 module initiates the call.
Prompts advise User A of the progress in making the call. When the link is
established, the phone at 555-1212 rings.
4) User A and the person he's called on telephone now talk. At the end of
conversation, either user can terminate the link by entering * #. In links involving
more than two modules, all users should terminate the link by using * #.