Instruction manual

ACU-1000 Operations Manual
2-80 Interoperability Now
2.15.2.11 Software Updates
The DSP is designed to support software updates in the field. Should it become necessary to
install updates to the software, the following process should be followed. Instructions and the
update software are available on the web at:
http://www.raytheon.com/capabilities/products/acu1000/index.html
On the right side of the page, all ACU-1000 related downloads are listed. This includes this
manual, the ACU Controller, and latest versions of software for the ACU-1000 modules.
Export regulations require that the form supplied on the website after a download request be
filled out prior to enabling the download.
Equipment Required:
• PC with Internet network access via a browser (e.g. Internet Explorer).
• Ethernet access via an Ethernet switch (for the connection to the DSP module’s front
panel Ethernet connector).
• Ethernet cable.
• DSP installed in the ACU-1000.
• DSP software and installation software available from the web site listed above.
• The IP address of the networked DSP that will be updated.
Procedure:
1. Use the PC connected to the Internet to browse to the web site listed above
2. Download the DSP software by right clicking on dsp2_update.zip, and choose save target
as. Browse to a local folder on your computer to deposit it, then click save.
3. Unzip the files in the zip archive.
4. Connect the DSP to the LAN via the switch and Ethernet cable.
5. Launch the autoupdate software by navigating to the folder where it was unzipped / saved,
and double clicking on the file autoupdate.exe.
6. A dialog box similar to the one shown below will appear:
Figure 2-36 DSP Module Software Update Dialog
7. Enter the IP address of the DSP, the path to dsp2_app.s19 (the update software), and insure
that the Reboot when complete checkbox is checked.
8. Click the Update button, and a status bar will appear, showing the update progress.