Instruction manual

ACU-1000 Operations Manual
2-68 Interoperability Now
9. After a short delay (10-15 seconds), the following dialog will appear: the CPM will be
reset and restarted with the new software activated.
Figure 2-29 Successful Programming Announcement
10. Click OK to close the “AutoUpdate” dialog.
11. Verify the new version of the software has been loaded correctly by browsing to the IP
address of the CPM-4, and validating the Firmware version matches the latest release
“CPM-4 SW Version” (per website).
Figure 2-30 CPM-4 Information Screen
12. This completes the process for updating the CPM-4 software.