Product specifications

90
Map too Large to fit
This error is caused by trying to load too large a region into the space remaining. The solution is
to remove some files. The Map Loader can be used to remove other regions to make room for
the new region. The file explorer program can be used to remove other files as needed to make
space. Tap the ok button to refresh the screen size measurement if needed.
A special case is that this error can be because the Longhaul maps are loaded and a very large
region is being installed. Due to updated maps from NavTeq a few regions have grown so large
as to prevent the Longhauls from co-existing in the Flash Disk area. Mobile Crossing has decided
that supplying the larger maps is preferable to reducing the region area in most cases although
some region definitions may be changed if needed. If you need or want some Longhaul maps in
these large regions the following procedure can be used:
1. Load the Longhaul maps using the Map Loader prior to selecting the region.
2. Check the region you want to load to determine how much additional space you
need.
3. Use the File Explorer program to traverse to the map directory and look at the maps.
If you do not see maps tap and hold on the screen and select View All Files.
4. Delete maps you do not need. (If you can’t tell the name of the map use the rename
command to display the full map name. They are in alphabetical order.)
5. You can use Settings > System > Memory > Storage Card to check the amount of
free memory. It is a good idea to leave 1 or 2 Meg free for future use.
6. Repeat steps 4 and 5 until the desired amount of memory is reached and then return
to the map loader.
Other Map Loader Errors
The screen error message will provide instructions on recovering from the error.
If you use Settings > System > Memory > Running Programs to stop the Map Loader you
may find more than one entry in the list. Be sure and stop all copies. Do not attempt to activate
Map Loader from this menu.
Do not run other programs while Map Loader is running. If you have to be sure and quit out of
them to return to Map Loader. Switching directly to Map Loader may causes sequencing errors
between screens.
Be sure that the WayPoint
tm
software is not running when working with maps. If the WayPoint
program has the maps open you will not be able to erase them.