Product specifications

4. Once the files are located on the card you can use it for map loading just like the one

purchased from Mobile Crossing. (The one from Mobile Crossing may contain extra

features such as autorun.)

Note that there may be duplicate files in the various regions. They are identical and can be

overwritten if you wish when making the copies.

Map Loading Steps

The steps to load a map are described in this section. The program itself will sense the Map Card

and use it if it is available. Otherwise the program will attempt to retrieve the maps from the

internet. If you have a Map Loader equipped card please insert it before beginning the process. If

you will need an Internet connection, it should be established before starting Map Loader.

1. Use the process shown in “Starting the WayPoint Map Loader” on page 74 to start the

program and use the Next commands to move to the Main Menu.

2. From the Main Menu select the destination for the maps. Tap Build Base Map to place

the maps on your Flash Disk. Tap Build Map Card to place the maps on your SD card.

Once you have selected the destination a screen will appear to allow you to select the map

region you wish to load. This is shown at the top of the next page.

3. Use the drop-down menu to select one of your available regions. All of your purchased

regions will be shown, even those you may have already loaded. The loaded regions will

be shown on the bottom map. In the figure above the screen is showing that Pacific

region and the Long Haul maps are already installed while the Bluegrass region is

selected. Clearly this is too large to fit in the Flash Disk area.

4. If the region you want to install is too large then you will need to remove the existing

maps. Use the pull down menu to choose one of the installed regions and the button

name will change to uninstall map. Tap Proceed to uninstall the map.