Product specifications

58
WayPoint Navigation
CONTACTS SEARCH
Selecting Contacts lets you search through your address book. The WayPoint
tm
software will
copy a list of the address book entries to a form within the program. Specific Step by Step flows
can be seen in Chapter 7,
“Step-by-Step” on page 65.
• There must be an address listed for you contact for the address search to work.
• If there are two addresses it will present the choice of work or home.
• Select the address you want and tap ok to begin the search.
Occasionally the form of the address in the address book will not match the form needed by the
WayPoint software. If this happens the location will be identified but the search will fail. You can
try editing the address entry being shown on the search screen to give it a clearer address.
Generally the search works best with less data. One wrong character will cause the search to fail
but leaving out letters or even whole words will not be a problem for the search algorithm. Once
it presents a list of possible choices you can simply select the correct one.
If you are able to find the address this way you might consider using the displayed form in your
contact list so that future searches will be successful.
The Quick Approach
There are two hotkeys preprogrammed to facilitate quick routing.
ROUTE TO FAVORITES
Tap the Favorites Button to navigate to one of your favorites. Selecting one from the list
will kick off the router and route to that location from your current location. You must have a
GPS fix for this to work. Specific Step by Step flows can be seen in
“Step-by-Step” on page 65.
TAKE A QUICK DETOUR
If you are driving and need some Gas or Food the Quick Detour function can be handy. It is also
a good way to find close by locations.
Press and hold the detour button for a couple of seconds and the category screen will
appear as shown on the next page.