Product specifications

40
Getting Started w/ Navigation
these are called Favorites, Detour, Status, and WayPoint
tm
buttons. From the map screen the
buttons work as follows:
Press the Button
Press and hold the Button
Favorites
Navigate to one of your
favorite locations. (See
“Route to Favorites” on
page 58.)
Save an entry in locations at your
current position. (See
“Saving your
home location” on page 44.)
Detour
If no route then bring up
the route form else
Route with Detour. (See
“Building a route” on
page 56 or “Detours ” on
page 62.)
Navigate to nearby Gas Station,
Restaurant, or other Location. (See
“Take A Quick Detour” on
page 58.)
Status
Check GPS status by
displaying the GPS
screen. (See
“Starting the
GPS” on page 40.)
Provide voice prompt with
distance to and direction of next
turn. Use this to repeat a message
that you missed.
WayPoint
Go to previous
application (Leave
WayPoint navigation).
Start TrafficWatch & Weather
Underground programs. Other
quick start programs can also be
configured.
The WayPoint button is the method of starting WayPoint navigation software and leaving
WayPoint navigation software. The effect of the button is to toggle between navigation and
another task.
Subscreen Button use
When viewing a subscreen such as the GPS information, pressing the same button again (or any
of the left three buttons) will be the same as OK. Pressing the WayPoint
button (which has
no subscreen) performs a cancel.
Starting the GPS
After starting the software a connection should be established between the WayPoint program
and the GPS installed above.
Press the GPS status button to reach the screen where the GPS data is displayed. One of
the two GPS views shown below will be visible. The left and right cursor keys can be used to
switch screens.