Product specifications

21
Getting Started
The included AC adapter accepts 90V to 260V, enabling worldwide use with the appropriate
local connector.
To charge the device using the AC adapter:
1. Connect the travel adapter to the charging/communications port on the base of your
WayPoint
tm
PDA as shown in the picture below.
2. Connect the adapter cord to the adapter cord connector of the travel cable.
3. Plug the adapter into an AC outlet.
The power LED shows flashing red while the battery is fast charging and continuous green
light when the battery is in trickle charging at least 80% charged.
Direct Connection to the AC Power Supply via the travel adapter
! Important! You must fully charge the battery the first time you operate your WayPoint PDA.
A full charge of both main battery and backup battery will take approximately 8
hours.
BLUETOOTH GPS CHARGING
The WayPoint 200 GPS receiver can also be charged using the same AC charger or via the
included dual-charge cable. The dual-charge cable permits simultaneous charging of the GPS and
the PDA. The Charging lamp will light on the GPS when it is being charged. This lamp will dim
and finally shut off when the GPS is fully charged.