Product specifications

Rear view of the WayPoint
tm
PDA
WARNING: Be sure data is backed up
before operating this switch. All data will
be lost
.
Software reset button shown for
reference (item 8)
18
17. Main battery - To remove the battery
cover:
Press the button on the battery cover
and slide it downwards. The battery
cover can then be lifted off. Please
note that when the button on the
battery cover is pressed, the device
goes into sleep mode.
To replace the battery cover the cover
should be pushed firmly over the
battery compartment, making sure
that the tabs on the cover engage with
the guides in the battery
compartment. The cover can then be
slid up into place.
The cover should fit snugly into place
with no gaps.
18. Master Power Switch - Unscrew the
top end of the stylus and use to
operate the switch (Only visible after
battery is removed). This switch is
used to perform a Hardware reset.