Product specifications

14
Velcro is supplied that may be used to secure the GPS while providing the ability to easily
remove the unit.
1. To attach the Velcro, clean both mating surfaces and attach the pad side to the bottom of
the unit by removing the tape and attaching the sticky side of the pad to the unit.
2. Ensure proper operation before making the final location choice.
a. Place the GPS in the proposed location and turn on both the GPS and PDA.
b. Setup up the GPS connection to the PDA using the instructions in “Getting
Started with Navigation ” on page 38.
3. After ensuring the location has good reception, attach the hook side to the dashboard.
4. Full wireless operation can be used up to 8 hours on batteries.
Tip - If your WayPoint PDA is Stolen
Be sure and remove the WayPoint
tm
PDA when you leave the car. This unit is a tempting target
for thieves. If your unit does get stolen, be sure to report this to the police and to Mobile
Crossing. Mobile Crossing maintains a database of all registered units which may be useful in
identifying your missing unit.
The Bluetooth receiver can also be a tempting target. It can be covered or placed out of sight so
long at the reception isn’t blocked by metallic surfaces. If you are not planning on removing it
every time you may want to experiment with finding a secure location. Otherwise you may want
to consider removing the mount itself from the Goose neck.
Tip - Periodically check the suction cup.
Inspect the suction cup from time to time by looking at it from the outside to ensure that it is still
fully sealed against the windshield. It can be removed for use in another vehicle when you need
to by twisting the knurled knob to release the suction and then prying the cup from the
windshield. Always clean both surfaces before attaching to the windshield.