Product specifications

11
Getting Started
f. Follow the on-screen instructions to calibrate the screen and set up the operating
system.
g. Do not remove the unit from the charger during these steps unless it has been
charged the full 8 hours.
5. There is a backup battery in the unit. It will be recharged from the main battery and is
used to permit swapping the main battery for a spare without losing any information.
You are likely to see a message about a low backup battery when you first turn the unit
on.
Slide the Master Power switch from off to on the first time you use your WayPoint
tm
PDA. Note the use of
the top of the stylus as shown in the picture. Please note that the power switch must remain switched on
when the WayPoint PDA is in use.
Turning Your WayPoint PDA On and Off
Turning Your WayPoint PDA On
Your WayPoint PDA offers the convenience of instant on, enabling you to start work
immediately without waiting for lengthy initiation procedures to be completed. To turn on your
WayPoint PDA, press the power button, the recorder button or one of the 4 programmable
application buttons.
It is possible to disable the feature of turning on the unit from the four (4) application buttons
and the recorder button. For details see the Pocket PC reference guide included on the CDROM.
Turning Your WayPoint PDA Off
When you turn your WayPoint PDA off, the device will not shut down completely, but instead
enters standby mode. Although power consumption is extremely low, the system clock continues