Product specifications

c. Place the cover on and press down to slide the cover in place. See figure below.

ABCD12345678

2. Before using your WayPoint

PDA for the first time, you will

need to use AC

USB (Universal Serial

Bus) refers to an con-

nector on the front

or back of your com-

puter or peripheral

device. It serves as a

method for the data

or power to get from

the computer to the

peripheral device.

power to charge the battery. There are two ways

to do this:

a. Connect your WayPoint PDA to a wall outlet using the

travel adapter.

b. Plug the USB cradle into a wall outlet and dock the

device in the cradle.

Please read the discussion on “Power” on page 20 for

information on setting up the cradle or travel adapter for

charging.

3. Allow a total of 8 hours to fully charge your main battery and backup battery. You must

fully charge the battery before disconnecting the device from AC power. the first time.

4. To prepare your WayPoint PDA for use, follow this simple procedure the first time you

turn the device on.

a. First, remove the back cover and battery.

b. Locate the master power switch beneath the main battery.

c. Unscrew the top of the stylus and use it to slide the switch from off to on. See

the drawing on the next page.

d. Put in the main battery.

e. Wait 1 minute for the Welcome Wizard to be displayed.