Product specifications

96
After tapping Property text in the above middle screen shows the SPP connection is on COM 8.
The Options screen is reached Tool > Configuration in the Bluetooth Manager. It is shown on
the above right.
• The Address is the internet address for a pan connection.
• The name is the one used to identify the WayPoint
tm
PDA in Bluetooth connections.
• The security can be set to high security to require paired devices. If not checked then no
pairing will be required.
• A fixed password for this unit can be assigned if desired. Otherwise you may be
prompted for a Passkey.
• The tabs show the connection options settings for various Protocols supported by this
unit including the business card transfer (OPP).
Bluetooth GPS Receiver
The Bluetooth GPS receiver is the prime use for the Bluetooth module in the WayPoint PDA.
The unit runs 8 hours on its own internal battery is fully charged when the lamp goes out. A few
tips include:
• Do not exceed 5 V input.
• If left unused, a fully charged battery will discharge itself over time.
• Do not cover the antenna area shown in the figure on the next page. It is used for GPS
reception and for Bluetooth operation.