User's Manual

Installation & Assembly
Applications
This Direct Connect M2M Booster is designed to be placed between the cellular
device and it’s outside antenna.
Make all connections as in Fig. 1 and see Applications in Fig.2 & Fig. 3
Important: Use only the power supply included with the booster.
Connecting any other power supply at any time will result in damage to the
booster and will void the warranty.
Do not turn on the power switch until ALL cables have been screwed or plugged
into the booster or you can cause damage to the booster.
Fig. 2 Fig. 3
Desktop Direct Connect 120V Power Type
Mobile Tracking Direct Connect
CLA 12V Socket Type
2