User's Manual

Fig. 1 Fig. 2
Operational Bands 800MHz Cellular 1900MHz PCS
Maximum Radiated Power (EIRP) 29.9 dBm 29.9 dBm
Maximum Rated Power (conducted) 29 dBm 28 dBm
Gain 23 dB
Impedance (input/ouput) 50 Ohms
Power Supply 12 Volt DC or 120 Volt AC/DC
Operating Temperature -32C to +85C
Antenna Connectors MCT Male
Dimensions 6.25x3.5x1.125 inches
Weight 1.0 Lb
SPECIFICATIONS
1) Installation & Assembly:
Connect the inside antenna or cell phone holder, the outside antenna and power supply
to the booster. Please make sure to connect each item to the correct ports as indicated
on the booster.
2) Placement
Connect the booster as shown in Fig. 1 and Fig. 2
Important:
Use only the power supply included with the booster. Connecting any other power
supply at any time will result in damage to the booster and will void the warranty.
Do not turn on the power switch until ALL cables have been screwed or plugged
into the booster or you can cause damage to the booster.