User's Manual

ManualsBrandsMobile Communications ManualsElectronicsDUAL-BAND SINGLE DIRECTION PCS/CDMA AMPLIFIER

User Instruction Manual

Model BRM120

Maximum Power

m t

CDMA IS95, CDMA 1X, CDMA2000, WCDMA

GSM, GPRS, EDGE, HSPA, HSPDA, UMTS,

Cellular/PCS

Dual Band Wireless Amplifier

For use with:

The B 120 is a Dual Band 800/1900Mhz

Signal Amplifier which increases your Cellular and PCS

band signal , expands your service coverage area,

enhances voice call quality and significantly

increases Data speeds

RM Wireless

See the entire product line of fine quality Cellular Signal

and Handsfree Products at Smoothtalker.com

Please contact any Authorized Smoothtalker products

dealer or Smoothtalker.com

Technical Support & Customer Service:

1 Year against manufacturing defects. Does not include

misuse or customer damage. Original Bill of Sale is

required for all Warranty Claims

Warranty

*Initial Setup of your BRM120 should not be done at close

range to any Cell Tower or you could experience false

trouble light readings

*The BRM120 is designed to be used without any physical

connection to your mobile device

Do NOT Directly connect the BRM120 to your phone or

mobile device or you could experince a decrease in your

Signal Strength

*For best performance of the BRM120 please ensure that

your phone or other mobile device is located within 20

inches of the interior antenna

**IMPORTANT NOTES**

NOTE: This equipment has been tested and found to comply with

the limits for a Class AB digital devices, pursuant to Part 22&24 of the

FCC Rules.

"Changes or modifications not expressly approved by MCI, Inc.,the party responsible

for compliance, could void the user's authority to operate the equipment."

It is easy and simple to install and you can be up and

running in minutes

**This device should be installed with the antenna supplied. It is required that the antenna is

mounted is a suitable location which is a minimum distance of 20cm(8 inches)away from

the user or nearby persons in order to comply with FCC rules concerning

MPE (Maximum Permissible Exposure) safety limits**

Summary of content (2 pages)

PAGE 1
**IMPORTANT NOTES** SmoothTalker *For best performance of the BRM120 please ensure that your phone or other mobile device is located within 20 inches of the interior antenna Maximum Power *The BRM120 is designed to be used without any physical connection to your mobile device Do NOT Directly connect the BRM120 to your phone or mobile device or you could experince a decrease in your Signal Strength *Initial Setup of your BRM120 should not be done at close range to any Cell Tower or you could experience f
PAGE 2
Typical Desktop Installation User Manual & Instructions Getting Started: Parts required (not all are included pls check your Model#) Inside Antenna SEMP1 BRM120AA Amplifier unit ACX100 Outside Antenna SEM2MX Inside Antenna SEMR1 12V Power DCH14 12V Install DCH15 12V Wall power supply DCH13HV Pls note: The co-ax cable connectors on the BRM120 are only available from Smoothtalker.com or Authorized Smoothtalker Dealers and are MCT type co-ax.