Installation Guide

Document Name: iRISupply™ Installation and Assembly Guide
Published: 05/11/2004 Doc #: Version 2.0
Document Name: iRISupply™ Installation and Assembly Guide
Published: 05/11/2004 Doc #: Version 2.0
1
• Access the customer’s network via dial-up modem
line or VPN customer. The actual method will
depend on the customer.
1. Safety Considerations
The iRISupply™ Cabinet System is designed to provide
safe and dependable service if operated according to
instructions. Read and understand the associated
documentation before operating the system. You can
prevent accidents by being familiar with the systems
controls, and by observing safe operating procedures.
• Attempt to ping the cabinet via the remote access
connection. Use the same procedure as listed
above to ping the cabinet.
• Use the Huey tool to remotely control the machine.
Huey will need to be configured with the proper IP
address and port (usually 5662) to make this work.
1.1. Label Locations
These labels warn you of potential hazards that can
cause serious injury. Read them carefully. If a label
comes off or becomes hard to read, contact Mobile
Aspects for a replacement.
If the Huey tool connects and works then the remote
access connections are working properly. If not, work
with technical support to resolve the issue.
“Warning:Do Not Plug In External Devices” Label: Placed on
the two power strips located inside the control cabinet.
“FCC/CSA” Label: Placed on the bottom back of control cabinet.
“Rating” Label: Placed on power strips inside compartments.
// MOBILE // ASPECTS //
MODEL:
S/N: MFG DATE:
FCC ID:
MADE IN U.S.A
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the following two conditions: (1) this
device may not cause harmful
interference, and (2) this device must
accept any interference received,
inclu d ing interfere n ce that may cause
undesired operations.
120Vac, 60 Hz, 10A Max
IS100
INPUT:
WARNING
DO NOT PLUG IN
EXTERNAL DEVICES
Rear View Front View
Figure 1 - Master Cabinet Safety Label Location
40