User Manual

STEP 5 Pairing
Installation 005
Pairing 02
7
Figure 5.1 Pin Code Request
Figure 5.2 Network Access Connection
Failed
What is Paring? - Paring allows two devices to be setup and will recognize
each other whenever these two devices meet again.
Note: Some devices do not require pairing. If unsure, check the user
manual of other Bluetooth Device, otherwise you will be prompted when
pairing is necessary.
When do I need to Pair?
There are several different ways that you will be required to pair.
Case 1.) Enter a PIN Code
The Bluetooth PIN Code Request window will
automatically appear when you double click on
a service of another Bluetooth device when a
PIN is required.
Case 2.) Network Access connection failed
If you see this message, you will need
to repair.
To repair follow steps to Manual
Paring.
Note: This message usually occurs if the PIN was entered incorrectly, or
other Bluetooth device did not respond to pairing initiation.
Case 3.) You wish to unpair or repair
If you wish to unpair, Refer to Manual Paring, Step 2 and 3.
Pairing