User's Manual
Table Of Contents
- 1 Introduction 1
- Basic Operations
- Client Applications
- Local Services
- Configuration Panel
- Security
- Technical Support
- Troubleshooting
- Cannot connect to a paired device:
- Cannot discover services on an un-paired remote device:
- Dial-up Networking service does not start:
- How do I determine the Bluetooth Device Address (BDA) of my hardware device?
- How do I determine the version number of the Bluetooth Specification that the Host Controller Interface (HCI) complies with?
- How do I determine the version number of the Link Manager Protocol (LMP)?
- How do I find information about the Bluetooth hardware attached to my computer?
- How do I test a Network Access connection?
- Why do I get an Unknown Port message when I attempt to use a Bluetooth Serial Port?
- Glossary
BTW Configuration & User’s Guide Configuration Panel
April 5, 2002 WIDCOMM
24
5.4.1 Hardware Advanced Settings Dialog Box
When available, this dialog box is reached from the Hardware tab of the Bluetooth
Configuration Panel.
Depending on the country in which the hardware is sold and/or in which it will be used,
the Advanced button may not be present.
From this dialog box you can set the:
• Country Code:
! North America, Europe (except France), and Japan
! France and China
• Maximum Transmission Power:
! High
! Medium
! Low.
Click the Apply button to implement the changes. A dialog box appears with notification
that the Bluetooth device attached to this computer must be reset before the change(s)
will take effect.
Click the Yes button to reset the Bluetooth device now—all open Bluetooth connections
will be closed.
Click the No button to save the changes—the changes will be applied the next time the
Bluetooth device is reset or restarted.