User's Manual
Table Of Contents
- Your Voiis Headset Package
- Package Contents
- Get Prepared
- Bsic Operations and LED indicators
- Use Your Voiis Headset
- Safety information
- Care and Maintenance
- Headset
- Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally activated, your mobile phone may place an unintended call.
- Do not expose the headset to liquid, moisture or humidity as it is not waterproof.
- Do not use abrasive cleaning solvents to clean the headset.
- Do not expose the headset to extreme temperature conditions.
- The best storage temperature range is from -10 C to +60 C, or the life of the headset will be influenced.
- Do not dispose of the headset in a fire as it this may result in an explosion.
- Do not bring your headset into contact with sharp objects as this will cause scratches and damage.
- Do not stick anything inside the headset as this may damage the internal components.
- Do not attempt to disassemble the headset as it does not contain serviceable components.
- If you do not use the headset for long periods, be sure to store it in a dry place, free from extreme temperature conditions and dust.
- If storage over a month, please ensure the charging is in time to guarantee the functions of the battery and headset.
- Built-in Battery
- Headset
- Troubleshooting
Use Your Voiis Headset 18
From a paired PC
Note: Please make sure the Voiis Dongle is plugged into the USB port on the PC and is paired with the Voiis
Headset beforehand.
To activate A2DP profile, press and hold >> or << for 3 seconds until a beep sound is heard and the
red and blue LED indicators start flashing simultaneously every 2 seconds.
Furthermore, to operate the HID-compatible software, such as Windows Media Player, over the Voiis
Dongle from your Voiis Headset (AVRCP), please follow the steps below to complete the settings.
Note: The AVCRP Profile is a standard interface for a single remote control (for example, the Voiis Headset),
to control all the paired Bluetooth A/V equipments, such as Bluetooth mobile phones, PDAs, MP3 players
and PC media Players.
1. Go to Windows Media Player Tools -> Options, select Speakers under Devices tab, and click
Properties to select USB Sound Device as the desired device.