User's Manual
Table Of Contents
- Your Voiis Headset Package
- Package Contents
- Get Prepared
- Bsic Operations and LED indicators
- Use Your Voiis Headset
- Safety information
- Care and Maintenance
- Headset
- Consider turning your headset off before placing it in your pocket or bag. If the MFB is accidentally activated, your mobile phone may place an unintended call.
- Do not expose the headset to liquid, moisture or humidity as it is not waterproof.
- Do not use abrasive cleaning solvents to clean the headset.
- Do not expose the headset to extreme temperature conditions.
- The best storage temperature range is from -10 C to +60 C, or the life of the headset will be influenced.
- Do not dispose of the headset in a fire as it this may result in an explosion.
- Do not bring your headset into contact with sharp objects as this will cause scratches and damage.
- Do not stick anything inside the headset as this may damage the internal components.
- Do not attempt to disassemble the headset as it does not contain serviceable components.
- If you do not use the headset for long periods, be sure to store it in a dry place, free from extreme temperature conditions and dust.
- If storage over a month, please ensure the charging is in time to guarantee the functions of the battery and headset.
- Built-in Battery
- Headset
- Troubleshooting
Bsic Operations and LED indicators 11
MFB (Multi Function Button)
Power on: Press the MFB to power on the Voiis Headset.
Power off: Press and hold the MFB for 3 seconds to power off the Voiis Headset. The red LED indi-
cator flashes once before the Voiis Headset is powered off.
Pair: The Voiis Headset goes into pairing mode when it's powered on. To go into the pairing mode
when the Voiis Headset is powered on. Press and hold the MFB.
Reset: Press and hold the MFB for 15 seconds when the Voiis Headset is powered off. All the saved
pairing devices records will be deleted after the reset.
Answer calls: Press the MFB to take a call.
End calls: Press the MFB to end a call.
Reject calls: Press the MFB for 3 seconds to reject an incoming call.
Play: Press the MFB to start playback when A2DP is activated.
Pause: Press the MFB to pause the playback during playback when A2DP is activated.
<< and >>
Next track: Press >> to go to the next track during playback.
Previous track: Press << to go to the previous track during playback.
Switch between mono and stereo: Press and hold << or >> for 3 seconds to switch between mono
and stereo.
Re-connect to the previously-connected A2DP device: When Voiis Headset is no connected to the
Voiis Dongle, press and hold << or >> to re-connect to the previously-connected A2DP device.