User's Manual

2. Remove battery insulation sheet
The device comes with a battery pre-inserted. Before using the device, the insulation
sheet must be removed in order to use the device.
Important Notice
Please remove the insulation sheet as shown in the image illustrated above. (Improper
removal of the insulation sheet might end up breaking the insulation sheet.) Once the
battery fails to activate, you will need to open the battery cover, and clean out scraps
of the broken sheet.
3. Install Pedometer
a. Install Pedometer on top of Sneakers
When the device is tightened on the shoelace, make sure the color side faces up, while
the shoelace should be pulled through the two shoelace holes aside the device and tied
with a knot to fasten the device.
Important Notice
While tying the shoelace, pull one through from upward while the other from
downward, and make sure the color side faces up.
Please try to keep the device at horizontal level, for excessive tilting might cause
incorrect detection.
b. Install Device on the Soles of the Sneakers
This device can also be installed in shoes that come with insertion slot for pace
pedometer, such as Nike or Adidas shoes with special feature marks.
Lift up the shoe pad while installing the device, and make sure the color side faces up
while inserted in the slot.