Operation Manual

EN
Cleaning and maintenance F16 AC
10
➤ Press the blanking plugs into the door and the refrigerator where you have
unscrewed the hinges.
➤ Insert the hinges at the left side of the door.
➤ Fasten the hinges each with two screws at the door.
➤ Fasten the door and the hinges each with two screws at the right side of
the refrigerator.
7 Cleaning and maintenance
!
WARNING!
Always disconnect the device from the mains before you clean and
service it.
A
NOTICE! Risk of damage
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
8 Troubleshooting
Problem Possible cause Suggested remedy
Your device is not
working (plug is
inserted).
No voltage present in the
AC voltage socket.
Try using another plug socket.
The inner fan or the cooling
element is defective.
This can only be repaired by an
authorised repair centre.
The integrated mains
adapter is defective.
This can only be repaired by an author-
ised customer services unit.