User Manual

Table Of Contents
EN
Operation MCF32, MCF40, MCF60, FR40 AC/DC
16
6.7 Setting the temperature
Press the “SET” button once.
Use the “+” and “–” buttons to select the cooling temperature.
The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is
displayed again.
6.8 Switching off the cooling device
Empty the cooling device.
Switch the cooling device off.
Pull out the connection cable.
If you do not want to use the cooling device for a longer period of time:
Leave the lid slightly open. This prevents odour build-up.
6.9 Using the interior light (only MCF60)
Ensure the display shows the actual temperature.
Press the “–” button to switch the interior light on.
Press the “–” button again to switch the interior light off.
The black dot (fig. 2 8, page 3) in the upper left corner of the display indi-
cates whether the interior light is switched on or off.
I
6.10 Defrosting the cooling device
Humidity can form frost in the interior of the cooling device or on the evapora-
tor. This reduces the cooling capacity. Defrost the cooling device in good time
to avoid this.
A
NOTE
The interior light switches off automatically after 30 minutes.
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
FR34-FR40-FR60_MCF32-MCF40-MRF40-MCF60_OPM_EMEA16.book Seite 16 Mittwoch, 23. Dezember 2020 3:42 15