Troubleshooting guide

32
ChooseIt! Maker 2
The descriptions below will cover many of the options:
Simple Switch Box - just plug your switches into the Space and
Enter sockets.
Inclusive Multiswitch - plug your switches into sockets 1 and 2.
If this does not automatically work with the program, make sure its
software is set up so the switches act like the Space bar and Enter
keys.
Simply Works it-Switch with it-Receive - underneath the it-Switch
is a button to set its action. Set one it-Switch to Space and a second
it-Switch to Enter.
Crick USB Switch Interface - plug your switches into sockets 1
and 2. If these do not automatically work with the program, then
make sure its software is set up so the switches act like the Space
bar and Enter keys.
QuizWorks USB Switch Interface - plug your switches into the
left hand sockets. Press the red button on the side of the box one
or more times to make the red light line up with “Space Enter Tab
Esc Backspace”.
Joy Cable 2 - plug your switches into sockets 1 and 2. If this does
not automatically work, make sure its software is set up so the
switches act like the Space bar and Enter keys.
Switches
Switches can be connected to the computer in a variety of ways. As a
rule however, switches should act as if the Space bar or Enter keys are
pressed.