Troubleshooting guide

31
ChooseIt! Maker 2
Summary of Access Options
Mouse and Touch Screen
If the program is set for mouse access, any of the mouse buttons will
operate as a single switch. The mouse can also work as two switches: if
the Two Switches option is selected, the left and right mouse buttons will
operate as two separate switches.
Touch screens will work as a single switch. Just touch anywhere on the
screen!
In the touch screen control panel, set the touch mode to drawing or click
on touch for the best drag and drop performance.
Keyboard
If ChooseIt! Maker 2 is set up for single switch operation, the Spacebar
or Enter keys will act as the switch.
If the software is set up for two switch use, Spacebar and Enter operate
as two separate switches.
Concept Keyboard
This option is only available for the Windows version of the software.
You may use a Concept Keyboard as a single switch or as two switches,
using the left and right sides of the board.
Go to the Serial Switch menu and click on the Serial button. Select the
COM port where your Concept Keyboard is attached.