User's Manual

Step 2: Basic Operation
srotacidnIdnasnottuBnoitcnuFaremaCgniwonK
I.
Pairing Camera
Power Saving
105
SD Card Format
]onttuBrewoP[
litnusdnoces2rofnottubdloh,aremacehtFFOrewopoT.aremacehtNOrewopotecnoPush
.ffoseog]rotacidnIr
ewoP[
]yeKkniL[
.]aremaCgniriaP–noitarepOdecnavdA[eeS.reviecerhtiwaremacriapotsserP
]rotacidnIyrettaB[
.f
foseogDELneerGlitnuyrettabegrahcesaelp;gnigrahCyrettaB=DELneerG
gnihciwsnogulpesaelp,emitetunim-3niFFO
gninrutsiaremaC;woLyrettaB=DELdeR
.esusuounitnocdnagnigrahcrofylppusrewop
.degrahCylluFyrettaB=FFODEL
]r
otacidnIkniL[
]aremaCgniriaP–noitarepOdecnavdA[eeS.gnissecorpnisiecneuqesgniriaP=DELgniknilB
.ediugasan
oitces
.reviecerehtybpudekcipsiaremaC=DEL
.edomyb-dnatsnisiaremaC=FFODEL
]rotacidnIrewoP[
.NOderewopsiare
macnehwNOseogDEL
1
2
3
4
5
Blue
1. Use to select a channel.
2. Press
to start system countdown from 60 seconds.
3. Within 60-second countdown, press PAIR at the camera side. Image will
display when pairing is complete.
Use / to turn [Power Saving] mode On/Off.
By setting [Power Saving] mode On, both receiver and camera will enter
standby mode after 2-minute idle time and speaker volume will be mute.
Press power key of the receiver to resume monitor and camera .
Press / to select No or Yes.
For first time use, it is strongly recommended to format the SD card.
DC IN 5V/1A
PWR.